KOLB Piirilevynpesulaitteistot

The cleaning of assemblies (PCB cleaning) is almost mandatory today, particularly in high-end area. These boards (assembled / mounted PCBs) must be cleaned thoroughly of production residues and possible environmental and handling dirt to ensure a reliable further processing respectively a trouble-free performance. 

Especially where sensitive and thus mostly expensive modules are used, such as in the aerospace industry, the automotive industry, in medical technology or telecommunications, the assembled PCB cleaning is a full and impoertant production step. 

But even with the so-called no-clean manufacturing, it may be that these components must be cleaned to avoid malfunctions. 

The thorough removal of flux residues, colophony, resin, oxides and soldering materials are the main tasks in the cleaning of printed circuit boards, active and passive electronic components, BGA, flip chip, relays, inductors, etc. 

The cleaning of an assembly is not only a necessary prerequisite for reliable bonding and / or varnishing and so e.g. for climate security / avoiding current leakages. Asemmbled PCBs cleaning also allows debugging and so preserves the value of misprints  and / or ensures the optical quality of the electronic components. 

kolb provides for the cleaning of assembled PCBs the complete process as a manufacturer from a single source: including machinery, accessories, cleaners and specially applied electronic process control.

AQUBE® LH5
Fully automatic standard batch cleaner for assembled PCBs

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® LH5 is a fully automatic new generation standard PCB fine cleaning system with a capacity of up to 176 (2.8 m²) eurocards per process cycle.

AQUBE® LH5 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The two-tank, trible-circuit function configuration with ClosedLoop water reprocessing ensures short cycle times and makes this system the perfect economic choice for the precision cleaning of assembled PCBs.

AQUBE® LH7
Fully automatic state of the art XL batch cleaner for assembled PCBs

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® LH7 is a fully automatic XL high volume new generation PCB fine cleaning system - except AQUBE® 9 types there are no PCB cleaning batch systems with a comparably large chamber size available worldwide - with a capacity of up to 540 (8.6 m²) eurocards and a relative cleaning time of 10 seconds per card.

AQUBE® LH7 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The two-tank, triple-circuit function configuration with ClosedLoop water reprocessing ensures short cycle times and makes this system the perfect economic choice for the precision cleaning of assembled PCBs.

AQUBE® LH9
Super large state of the art system for assembled PCBs, hybrids, misprints

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® LH9 is a fully automatic XXL high volume new generation PCB fine cleaning system with by far the largest process chamber in a PCB cleaning batch system worldwide and thus with uncontested capacity per time (860 / 19m² eurocards) in one cleaning cycle (corresponding to a relative cleaning time of 6.5 seconds per card) than any common inline system.

AQUBE® LH9 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The two-tank, triple-circuit function configuration with ClosedLoop water reprocessing ensures short cycle times and makes this system the perfect economic choice for the precision cleaning of assembled PCBs.

AQUBE® LH9 systems, equipped with loading and unloading automats can be coupled to highly efficient super mass plants.

AQUBE® XH5
Fully automatic high end batch cleaner for assembled PCBs

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® XH5 is a fully automatic new generation PCB ultra-fine cleaning systemwith a capacity of up to 176 (2.8 m²) eurocards.

AQUBE® XH5 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The parallel working three-tank, three-circuit configuration with ClosedLoop water reprocessing ensures short cycle times as well as low running cost leading to an uncontested low total cost of ownership value.

AQUBE® XH7
High end PCB XL cleaning system for assembled PCBs, hybrids

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® XH7 is a fully automatic XL high volume new generation PCB ultra-fine cleaning system - except AQUBE® 9 types there are no PCB cleaning batch systems with a comparably large chamber size available worldwide - with a capacity of up to 540 (8.6 m²) eurocards and a relative cleaning time of 10 seconds per card.

AQUBE® XH7 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The parallel working three-tank, three-circuit configuration with ClosedLoop water reprocessing ensures short cycle times as well as low running cost leading to an uncontested low total cost of ownership value.

AQUBE® XH9
Super large high end system for assembled PCBs, hybrids, misprints

The new kolb AQUBE® series offer next-generation cleaning systems - even more efficient, even more compact, easy to handle and maintain, pre-equipped for extended water management and cyber-physically ready for the smart factory.

AQUBE® XH9 is a fully automatic XXL high volume new generation PCB ultra-fine cleaning system with by far the largest process chamber in a PCB cleaning batch system worldwide and thus with uncontested capacity per time (860 / 19m² eurocards) in one cleaning cycle (corresponding to a relative cleaning time of 6.5 seconds per card) than any common inline system.

AQUBE® XH9 is a German engineered and manufactured machine primarily for the process safe fine cleaning of assembled PCBs, hybrids (HDIs, SiPs) and misprints from reflow flux residues, resin, copper, oxide and soldering support substances.

The parallel working three-tank, three-circuit configuration with ClosedLoop water reprocessing ensures short cycle times as well as low running cost leading to an uncontested low total cost of ownership value.

AQUBE® XH9 systems, equipped with loading and unloading automats can be coupled to highly efficient super mass plants.

PSE L series

Economy systems for fine cleaning of assembled PCBs and hybrids

The economy systems of the kolb PSE L series are especially designed to offer process safe basic fine cleaning for PCBs, SiPs, HDI boards, hybrids and misprints from contaminations such as fluxes, rosin, resin, copper, Cu oxide and aggressive solder-support substances. PSE L systems clean up to 830 (19 m²) eurocards in four variable horizontal drawer baskets (relative cleaning time per board: approx. 8 seconds).

The systems with two (PSE LH5, PSE LH7) or three (PSE LX7) tanks and three circuits and a fully automatic up to 5step process (1. Cleaning,  2. MediumWipe®, 3. Rinsing (tap water), 4. DI-rinsing with continuous DI-water processing, 5. Drying) are extremely compact and energy saving.

Lisätty ostoskoriin